Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Kynar Flex® 2850-02 - PVDF - ARKEMA

Material Data Center offers the following functions for Kynar Flex® 2850-02:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Kynar Flex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта
Kynar Flex® resins are fluorinated thermoplastic copolymers. 

Kynar Flex® 2850-02 has been specifically designed for use in wire and cable constructions which require an Underwriters Laboratories temperature of 150ºC and a Limiting Oxygen Index (LOI) of at least 75.

Kynar Flex® 2850-02 is easily processed and has excellent physical, mechanical, thermal and flame resistant characteristics.  Kynar Flex® 2850-02 meets the smoke and flame requirements of UL 910 and ASTM E84 (the Modified Steiner Tunnel Test).  This copolymer is commonly used for pipe, wire jacketing, conduits, and in injection molded parts.

ADDITIONAL CHARACTERISTICS
• Excellent thermal stability
• Excellent abrasion resistance
• Impervious to UV degradation
• Self extinguishing material
• Extremely low smoke emission characteristics
• 0/0 rating in ASTM E-84/UL 723


Main applications:
  • injection molded applications requiring the high chemical and temperature resistance properties of Kynar 2850-00 resin
Технологические и физические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Показатель текучести расплава, ПТР 15 см³/10мин ISO 1133
Температура 232 °C -
Нагрузка 3.8 kg -
Механические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Модуль упругости при растяжении 1300 МПа ISO 527
Напряжение в точке текучести 40 МПа ISO 527
Удлинение в точке текучести 10 % ISO 527
Номинальное удлинение при разрыве >50 % ISO 527
Ударная вязкость по Шарпи с надрезом, +23°C 8 кДж/м2 ISO 179/1eA
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Температура плавления, 10°C/мин 157 °C ISO 11357-1/-3
Температура стеклования, 10°C/мин -40 °C ISO 11357-1/-2
Температура изгиба под нагрузкой, 1.80 МПа 46 °C ISO 75-1/-2
Класс горючести при номинальной толщине 1.5 мм V-0 класс IEC 60695-11-10
Толщина образца 1.5 мм -
желтая карточка (Yellow Card) да - -
Класс горючести при толщине образца h V-0 класс IEC 60695-11-10
Толщина образца 0.8 мм -
Кислородный индекс 43 % ISO 4589-1/-2
Особые свойства и характеристики
Способы переработки
Литье под давлением, Экструзия изоляции на кабели и провода
Специальные характеристики
Сополимер
Доступность материала по регионам
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.